2D CAD design in Southampton Hampshire
2D Cad Design in Southampton Hampshire is a professional service Adrian Walker offers you to create solutions for your parts.
Adrian Walker can design using a variety of data that you supply to work from.
Results are driven by simple instructions, sketches, basic dimensions, a photo or even broken parts etc.. We are likely able to reverse engineer your parts and create the required CAD data for it to be re-manufactured.
Case study of 2D Cad Design and a part reverse-engineered by Adrian Walker
This is a case study of an old worn and broken part, reversed engineered and designed in 2D CAD ready for manufacture from using the original broken one to get all data.
This part shown above was of an autopilot system on a yacht crossing over from Europe which needed replacing for the journey back.
Beyond repair, It was old, worn, and broken…
Step-by-step the dimensions were taken, measured, and checked from this original part and the data was gathered to enable it to be rebuilt in 2D CAD by Adrian Walker.
2D CAD data conversion
Converting the data taken from the original part into 2D CAD design geometry was the next job.
Shown above are some of the 2D CAD design workings undertaken.
Expert skills were used to work out tooth pitch, internal radiuses, diameters etc..
2D CAD data created for manufacturing.
The results are shown in the image above. The final Autopilot gear reverse engineered and re-designed in 2D CAD ready for manufacture.
Finished reverse-engineered part for an autopilot system on a yacht
Beyond repair, an old part from an autopilot system of a yacht had the data taken from it so it could be reverse-engineered and replaced.
Manufacturing drawings were produced in 2D CAD design software.
We then had the parts machined for our client to get them back up and running again!
Have you got a project or problem to solve? contact Adrian Walker for a solution
Detailed design work by Adrian Walker.
What will your project be?
J786